KAW950S3 is a 3-axis servo robot for 180-300T injection molding machines. It handles straight take-out and placement, which covers the majority of standard molding cells without paying for wrist rotation you do not need.

KEFAN servo robot with wide traverse stroke for long molding machines

Specifications

Suitable injection molding machine180-300T
Traverse stroke1450 mm
Crosswise stroke820 mm
Vertical stroke950 mm
Maximum load7 kg
Axes3 (traverse, crosswise, vertical)
Machine interfaceEUROMAP 67 / SPI

Standard configuration shown. Stroke, payload and EOAT options can be customised — confirm your machine interface and part geometry with our engineer before ordering.

When KAW950S3 fits your cell

  • Standard take-out and placement where part orientation is not critical.
  • High-cycle packaging and consumer goods where straight strokes are enough.
  • Cells that already have downstream orientation or stacking equipment.
  • Budget-sensitive projects that do not need wrist rotation.

EOAT and integration

Three-axis cells usually run vacuum cup tooling for flat parts or mechanical grippers for parts with a grippable feature. If your part must be rotated before it reaches the conveyor, either add a downstream fixture or step up to a 5-axis model.

See the full EOAT range and the 3-axis servo robots overview.