KAW700D5 5-Axis Servo Robot for 60-160T Injection Molding
KAW700D5 is a 5-axis servo robot for 60-160T injection molding machines. The wrist rotation orients the part before release, so inserts, labels and position-critical parts arrive in a fixed attitude instead of being dropped.
Specifications
| Suitable injection molding machine | 60-160T |
|---|---|
| Traverse stroke | 1300 mm |
| Main / sub crosswise stroke | 400 / 400 mm |
| Vertical stroke | 700 mm |
| Maximum load | 5 kg |
| Axes | 5 (traverse, crosswise main/sub, vertical, wrist rotation) |
| Machine interface | EUROMAP 67 / SPI |
Standard configuration shown. Stroke, payload and EOAT options can be customised — confirm your machine interface and part geometry with our engineer before ordering.
When KAW700D5 fits your cell
- Parts that must be released in a fixed orientation rather than dropped.
- Insert loading: place the insert, then remove the finished part on the same cycle.
- In-mold labeling where the label must be positioned in the open mold.
- Cells where the extra axis removes the need for a downstream orientation fixture.
EOAT and integration
Because the 5th axis controls part attitude, the gripper can be simpler than on a 3-axis machine. We normally supply vacuum cup tooling for flat parts, mechanical grippers where a grippable feature exists, and combined insert-loading tools when placement and removal happen on the same cycle.
See the full EOAT range and the 5-axis servo robots overview.